Description: Overview: The Peak Asic Temp Fix v3 is a specially designed PCB that replaces the two temperature sensors closest to the fan intake on Antminer S19, S19 Pro, S19j Pro, and more. It connects directly to the PIC microcontroller, eliminating the need for wiring. This manual will guide you through the soldering and installation process. Materials Needed: - Peak Asic Temp Fix v3 PCB (pre-tinned) - Soldering iron and solder - Multimeter - Optional: High-temperature epoxy (if additional board stabilization is desired) Installation Steps: 1. Preparation: - Power off and unplug the Antminer to ensure safety. - Identify the two faulty temperature sensors (addresses 0x48 and 0x49, closest to the fan intake) on the hashboard. - **Remove the two faulty temperature sensors** from the board before installing the Peak Asic Temp Fix v3. - The Peak Asic Temp Fix v3 comes pre-tinned. However, it is recommended to also pre-tin the corresponding pins on the PIC microcontroller for easier soldering. 2. Soldering the PCB - Align the Peak Asic Temp Fix v3 with the pins of the PIC microcontroller. - Solder the pre-tinned pads on the PCB directly to the matching 3V, GND, SDA, and SCL pins on the PIC. Double-check your connections using a multimeter to confirm proper contact. 3. Testing the Installation: - Once the PCB is securely soldered, power on the Antminer. - Monitor the temperature readings for addresses 0x48 and 0x49 to ensure that the sensors are functioning correctly and the readings are accurate. Note: This PCB fix is compatible with Antminer S19, S19 Pro, S19j Pro, and more models. It is intended only for replacing temperature sensors, so additional repairs may still be necessary for other hashboard issues. Safety Precautions: - Wear appropriate safety gear when soldering, such as gloves and eye protection. - Ensure the Antminer is unplugged and disconnected from any power sources before installation. - Avoid excessive heat on the PIC microcontroller during soldering to prevent damage.
Price: 25 USD
Location: Wheat Ridge, Colorado
End Time: 2024-12-16T00:17:00.000Z
Shipping Cost: 3 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Bitmain
Hash Algorithm: SHA-256
Processing Speed (GH/s): 95000
Compatible Currency: Bitcoin
Model: S19 95TH
Mining Hardware: ASIC, FPGA
Power Use (W): 3250
