Fuel Fluid Extractor AC110V Electric Transfer Pump Self Priming

Description: Package Includes: 1 *Electric Oil Pump Transfer Fuel Features: 1. Induction Motor with Aluminum Casing 2. in Built Filter Easily Accessible for Cleaning 3.It Is Very Simple to Use 4. Ideal for the On-site Transfer of Fuel 5. This Pump Has a High Flow Rate or 60l/Min 6. on/off Switch the Pump Is Easy to Operate 7. It Is Reliable, Inexpensive, Easy to Install 8. We Use All Copper Motor to Improve Sealing Performance, Moisture-proof and Dust-proof. 9. with Self Priming Pump and Bypass Valve Specifications: Construction: Cast Iron Motor: Ac110v(60hz) Power: 550watts Self Priming Flow Rate: 60l/Min/15.75 Gpm Speed: 2800（R/M） Flow: 4（M3/H） Suction Height: 5m/16ft Max Lift: 15m/49ft Continuous Duty Cycle Applicable Medium: Kerosene Note: 1. Please Read the Manual Carefully Before Usin Fuel Fluid Extractor AC110V Electric Transfer Pump Self PrimingDescriptionThe electric oil pump with a portable handle can make it easier for you to take it to the workplace. The powerful power of 550W can help you finish your work quickly and well. It is a "self-priming" electric oil pump, which means you do not need to fill the water pump before the first use. It will be a good helper for enterprises, mines, construction sites, fishing boats, pleasure boats, and small refueling points. Key FeaturesHigh-quality Material: This product adopts an high-quality full copper coil, and cast iron structure. High-quality materials and painting process make it has the performance of anti-corrosion, anti-rust, and strong pressure resistance, thus can effectively extend the service life of the product. High Safety: The purple copper coil movement can improve the sealing, moisture-proof, and dust-proof, thus can ensure the efficient, low temperature, and safe operation of the motor. In addition, the waterproof switch protection cover and anti-breaking wire terminal can also better protect your use safety. Economical and Practical: This product uses a self-starting system and is able to work and cycle continuously, which improves your working efficiency effectively. This product comes with its own self-priming pump and bypass valve, so you don't need to buy these accessories separately. Low Noise: The precision alloy parts inside the product can effectively soundproof and reduce noise. It can create a quiet working environment for you. Easy to Carry: The portable ergonomic handle makes it easier to carry. And the lightweight product weighs only 19.84 lbs, allowing you to take it outdoors to work as you wish. Strong Power: It has a flow rate of up to 15.85gal and is capable of lifting water up to 16 feet. With a power of up to 550w and a speed of up to 3300RPM, our engine can produce a lot of power to help you get the job done fast and well. Easy to Clean: The built-in filter makes the blades not easy to accumulate dust and easier to clean. And the surface of the product is smooth to clean, you just need to use a wet rag to wipe it gently. Easy to Operate: All you need to do is connect the hose and accessories and plug it in, then it's ready to work. The one-touch switch design also makes this product easier to start and stop. Powerful Heat Dissipation: The internal configuration of the heat dissipation port is equipped with a high-power fan to make it have the performance of efficient heat dissipation, which can effectively extend the service life of the product. Easy to Install: The product is simple in construction with an English manual and complete accessories, so you can quickly complete the installation. The compact size allows it to be mounted on a wall or quickly attached to a tanker truck, or placed directly on a drum. Details6.15ft Power Cord: The 6.15ft long power cord can reduce the space distance limitation for you to place the device, allowing you to use it more freely. Stable Base: The outward extending base is very stable and can guarantee the machine will not shake during operation. Multi-layer Oil Seal: The multi-layer oil seal ring can lock the liquid very well, thus guaranteeing the machine works dryly. Thickened Cast Iron Pump Head: The thickened cast iron construction makes it have higher working strength, so it is ideal for fieldwork. Rubber Antifouling Dust Plug: With a special rubber antifouling dust plug, it can effectively block dust and dirt to avoid damage to the inside of the machine. ApplicationThe applicable medium of this product is diesel oil and kerosene. It is mainly used for refueling mining machinery, engineering machinery, construction sites, fishing boats, cruise ships, small refueling points, and other equipment, as well as refueling and transmission of automobile self-provided power supply. SpecificationModel: ACTP60Process: PaintingColor: Yellow, Silver, BlackMaterial: Cast Iron, Aluminum Alloy, CopperPlug Standard: US StandardMotor: AC 110V 60Hz Flow Rate: 20-60L/5.28-15.85gal/minPower: 550Watts Self PrimingMax. Speed: 3300rpmSuction Height: 5m/16ftMax Lift: 15m/49ftInlet and Outlet Size: 2.5cm/1inPower Cord Length: 1.88m/6.16ftMaximum Working Pressure: 3BarAccuracy of Flowmeter: ± 1%Single Counting Range: 0 ～ 9999L/0 ～ 2641.46Gal (4-digit Liter, Maximum 9999L/2641.46Gal, Last 1-digit Liter with Scale)Assembly Required: YesGross Weight: 9.65kg/ 21.27 lbs Net Weight: 9kg/ 19.84 lbsProduct Size: 30*20*20cm/ 11.8*7.9*7.9 inPackage Size: 30*25*23cm/ 11.81*9.84*9.06in Package Included1 * Electric Oil Pump Transfer Fuel Diesel1 * English Manual1 * Filter2 * Connectors NotesThe motor of this product is ordinary and not explosion-proof. Therefore, it is strictly prohibited to use gasoline and high ignition point media! Please read the operating manual completely before use. And pay particular attention to the safety instructions included.3. Our oil pump will be tested with diesel oil before leaving the factory, so some of the diesel remains in the machine, please use it after cleaning. 4. It is not allowed to transport gasoline, ethanol, non-ethanol, and second-cycle fuel.5. Please make sure the power supply and oil pump voltage match before use.6. The oil inlet pipe and joints must not leak to ensure the suction range.7. Remember to install a strainer in the oil inlet pipe to avoid damage to the pump core due to hard debris being sucked into the pump cavity. The vane should always clear the surface dirt of the screen, otherwise, the screen will be blocked and the flow will be reduced and the pump will be damaged.8. The oil pump can work continuously, but idling without oil should not exceed 5 minutes, so as not to damage the pump core, oil seal, and vane by friction and heat.9. In order to ensure the service life of the oil pump, it is recommended to stop the pump after 20 minutes of continuous work for a short break.10. Products with electrical plugs are designed for use in the US. Please check compatibility before purchasing.11. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.Note: Only can pump diesel and kerosene Note: Only can pump diesel and kerosene Mediums that can only be transferred: diesel and paraffin. Petrol and motor oil are not allowed. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Oct 22, 2024 at 23:37:30 PDT, seller added the following information:

Price: 85.01 USD

Location: Chino, California

End Time: 2024-11-22T05:26:37.000Z

Shipping Cost: 0 USD