Description: Technical Product Bulletin FOOD AND DRUG APPLICATION EPOXY ADHESIVE PRODUCT DESCRIPTION: AA-BOND FDA8 EPOXY ADHESIVE is a low viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300. GENERAL PROPERTIES: Appearance Amber Cure Type Heat cure or Room Temperature Benefits Low viscosity Easily mixed Effective electrical insulator Low permeability to gases and vapors Mix Ratio by weight 100:100 / Resin: Hardener Typical Applications FDA Grade ApplicationsFood packagingIndirect contact with food and medical applications UNCURED PROPERTIES: Viscosity @ 25 °C 1,500 (After Mixing) @Temperature 77.0 °F, 25.0 °C Thixotropic Index 1.0 Specific Gravity, mixed 1.11 Reactive solids contents, % 100 Pot Life 45 minutes CURE SCHEDULE: 4 Hours @ 65°C 24 Hours @ 25°C CURED PROPERTIES: Hardness, Shore D 65 Dielectric strength volts/mil 410 ELECTRICAL PROPERTIES: Volume Resistivity 1.00e+14 ohm-cm Dielectric Constant 3.35 @Frequency 1000 Hz Dielectric Strength 410 kV/in Dissipation Factor 0.020 @Frequency 1000 Hz THERMAL PROPERTIES: Operating Temperature -70 to 145 °C CTE, linear 29.4 µin/in-°F @Temperature 68.0 °F GENERAL INFORMATION:For safe handling information on this product, consult theMaterial Safety Data Sheet, (MSDS). HOW TO USE: 1) Carefully clean and dry all surfaces to be bonded. 2) Apply AA-BOND FDA8 mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results. AVAILABILITY: This epoxy can be supplied in various different packages. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Price: 15.99 USD
Location: Warwick, Rhode Island
End Time: 2024-12-29T20:24:16.000Z
Shipping Cost: 4.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Brand: Atom Adhesives
Model: FDA8
MPN: AA-BOND FDA8
Country/Region of Manufacture: United States
Benefits 1: Low viscosity easily mixed
Benefits 2: effective electrical insulator low permeability
Typical Applications 1: FDA Grade Applications, food packaging
Typical Applications 2: indirect contact with food and medical application
