Monoprice Alpha In-Wall Speakers 6.5in Carbon Fiber 3-Way (pair) (34199)

Description: This carbon fiber in‑wall speaker is the perfect combination of performance and style. The use of carbon fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The carbon fiber mid‑range and silk dome tweeter produce clean, crisp, and clear highs and mids. You can fine tune the blend of sound using the built‑in high frequency attenuator in case the sound is too bright. The metal grille can be painted to match your walls and attaches easily using magnets. Louder with Less Power | Higher Power Handling with Less DistortionControl High Frequencies | Easy to Install | Use up to 10AWG Cable6.5‑inch Carbon Fiber 3‑way In‑Wall Speaker with Magnetic Grille Sound QualityStyleSimplicity Sound Quality: Life is too short for speakers that don't sound great! We believe that the whole point of listening to music is to hear it as the artist intended. Our engineers and audio experts have spent countless hours listening to and comparing various speakers until we were satisfied we had found models that fit our demanding standards.Style: While Monoprice believes in function over form, there is nothing wrong with having speakers that look good, too. This in‑wall speaker helps reduce clutter by getting your speakers off the floor or bookshelves. The magnetic metal grille can be painted to match your ceiling, so it virtually disappears from view.Simplicity: Installation is as easy as it can get. Use the included cutout template to mark your wall, make the cut then, using only a screwdriver, secure the speaker to the wall with the easy install mounting tabs. Carbon fiber gives you higher sensitivity, deeper bass, and higher power handling. Carbon fiber woofers are lighter and stiffer than conventional materials used in speaker manufacturing. The speaker cone is more sensitive to power, which means that you get more volume using less power. Additionally, the stiffer material means deeper bass and higher power handling, with significantly less distortion. 160 watts maximum input power6.5" carbon fiber woofer with rubber surround3.5" carbon fiber mid range1" silk dome tweeter58Hz ~ 20kHz frequency responseBuilt‑in high frequency attenuatorPaintable magnetic grille Model34199 Type3‑way in‑wallWoofer6.5" carbon fiber coneMid‑range3.5" carbon fiber coneTweeter1" silk domeFrequency Response58Hz ~ 20kHzCrossover Frequencies490Hz and 4.4kHzNominal Impedance8 ohmsPower Handling Capacity (RMS)80 wattsPower Handling Capacity (Peak)160 wattsSensitivity89dBResonant Frequency (Rs)55.562 HzDC Resistance (Re)7.2 ohmsSuspension Control (Qts)0.506Air Volume (Vas)14.857 litersCompression (Cms)631.844 µm/NMotor Strength (BL)7.628 TClosed/Vented (Fs/Qes) (EBP)99.21Linear Excursion (Xmax)2.5 mmSurface Area (SD)12.868 cm2Overall Dimensions12.1" x 8.7" x 3.6" (308 x 222 x 91 mm)Cutout Dimensions10.84" x 7.34" x 3.38" (275 x 186 x 86 mm)Weight (each)5.6 lbs. (2.5 kg)

Price: 120 USD

Location: Beverly Hills, California

End Time: 2024-11-15T21:56:16.000Z

Shipping Cost: N/A USD