T2 Trubor 1911 2011 Ramped GOVERNMENT 5" Barrel .355" .38 Super 38 Supercomp 9mm

Description: This barrel is to be fitted to any government sized slide that accepts a bull barrel in the calibers listed below. A government sized barrel is a 5" barrel. .355 and can be reamed for any chamber supporting a ,355 caliber bullet (9mm, 9x21, 9x23, 38 Super 38 Super comp, 9X25 Dillon, 357 Sig, 9X40) The one peice design means you won’t have to screw on the compensator nor worry about it coming loose.Minimum Recoil & Muzzle Flip; Superb AccuracyNon-threaded, matched combo effectively controls muzzle flip from high pressure ammunition while adding match-grade accuracy. First chamber has a 15° forward wall to increase lockup time. .932" wide comp provides clean, precise fitting to slide. Stainless steel, button rifled, bull barrel machined from a billet forging, then air gaged to ensure exact bore size and finish. Eliminates the barrel bushing for increased lockup area and improved accuracy. Fully ramped with Wilson/Nowlin style ramp for reliable feeding. Extra material at feed ramp, hood, locking lugs and muzzle allow precise fitting. Supplied with a generic, short chamber which can be opened up to accept any of the popular, pistol cartridges.STI barrels are made from 416 rifle grade stainless steel billet forgings. The bore is gun drilled, button rifled, then air gauged to offer the most exacting size and finish to make this the most consistent barrel available. The rifling is 1 in 16 twist and has six lands and grooves. The barrels are vacuum heat treated and vacuumed tempered to 40Rc, then machined to exacting specifications. The barrels are short chambered to allow gunsmiths to cut the chamber to their application. Extra material at feed ramp, hood, locking lugs and muzzle allow precise fitting. Barrels are supplied with a generic short chamber which can be opened up to accept any of the popular pistol cartridges. Fully ramped with Wilson/Nowlin-style ramp for reliable feeding. Extra material at feed ramp, hood, locking lugs and muzzle allow precise fitting. THIS IS FOR A 1911 STYLE FRAME WITH Wilson Nowlin Style Ramp - MAKE OR MODEL DOESN'T MATTERABOUT OUR PARTS: We are under NDA’s (Non-Disclosure Agreements) with different manufacturers to buy their overstock parts. All of the parts we receive are factory original parts. Some of our parts have the manufacturer’s stamps and logos as you‘ve seen. For example we might have parts marked Colt, Springfield, Smith & Wesson, Remington, Lone Wolf, FN, Sig Sauer, CZ, Springfield, etc. Or, we might receive the parts before the stamp is applied. Most of our parts are excess inventory that these companies overproduced because they overestimated how many guns they would sell. On some of our parts, we can ask the manufacturer to produce some extras which we then purchase (called a strategic overrun). On some of these strategic overruns, we can ask the manufacturer to slightly modify the parts to make them specialized. For example, we might have them make a barrel longer with porting, or apply a different colored finish, or custom cut a slide for a better appearance, etc. In any case, our parts are all top notch parts that you would expect to get in a brand new gun. The nature of this business model has plusses and minuses. The plusses are you get top quality original parts for less than you would pay otherwise. The main drawback, however, is that for most of our parts we cannot just pick up the phone and order more. Obtaining most of our products is hit and miss. Some items are produced enough that we can get more relatively easily, but others depend on if there was overstock accidentally produced. So, if we have it in stock, get it while we have it, because many of our products we can only get once and might not ever have an opportunity to buy them again. Be sure to join our thousands of followers by clicking on “Save This Seller” on the right hand side of any product page, so that you can see the new deals that we find before they sell out. WE WILL CANCEL ALL SALES TO FORWARDING COMPANIES THAT SHIP OUTSIDE OF THE USA. SALES TO UNITED STATES ONLY. It is the purchaser's responsibility to make certain that all part(s) are correctly fitted & installed. The purchaser and the installer of parts must accept FULL responsibility for the correct adjustment and functioning of the firearm after such installation. Improper fitting of any parts could result in malfunctioning, damage to the firearm, or serious injury or death to the shooter, and/or other persons. Please read all of our terms and policies before placing a bid, making an offer, or purchasing this or other items from us.TERMS & POLICIESIn no event shall we, our officers, directors, employees and/or other representatives be liable for any damages of any kind, including without limitation, direct, indirect, compensatory, special, consequential, punitive, and/or incidental damages related to the products sold. All firearms parts should be inspected and installed by a competent gunsmith.The illegality or unenforceability of any provision of these Terms of Use shall not affect the validity and enforceability of any legal and enforceable provisions of these terms and policies.We have taken reasonable efforts to ensure that the information contained is accurate; however, all information is provided ?as is? without any express or implied warranties, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non-infringement. In addition, by using the information from the listing, you understand and agree that all firearms are potentially dangerous if handled improperly and can pose risks and hazards to yourself and others, which may result in property damage, serious injury or death. Any advice, guidance or other information provided cannot completely anticipate your situation, and shall not create any warranty not expressly made herein, regardless of any omission or inaccuracy of information contained in our listings. You agree to defend, indemnify and hold the seller harmless against all third party claims, actions or demands, liabilities, and settlements, including, without limitation, reasonable attorney's fees, arising in connection with your use of this listing or resulting from, or alleged to result from, your use of the listings or your violation of these terms and policies.

Price: 286.77 USD

Location: Nelsonville, Ohio

End Time: 2023-08-26T23:18:17.000Z

Shipping Cost: 9.95 USD