Soundsmith Hyperion MKII-MR Lo-Output Cartridge w/Ultra-Lo-Mass MicroRidge Styli

Description: WE ARE AN AUTHORIZED SOUNDSMITH DEALER!Hyperion MKII-MRThe HYPERION (patent applied for) is the cartridge of choice for the most esteemed audio equipment manufacturers. Why? Because when they exhibit their gear at Hi-Fi shows, they want their turntable, amplifier or speaker systems to sound the very best that they can! Peter Ledermann‘s radical design utilizes an actual “cactus spine” for the cantilever. The naturally tapered shape, stacked columnar fibers and desiccated resin damping fit the exact parameters of the perfect cantilever: Low mass, extreme rigidity, internal damping, and tremendous strength. The Hyperion ES-MR is complimented with our select ultra low mass Micro Ridge stylus; a stylus design that maintains constant performance throughout its full lifetime, unlike all other stylus designs made. Each one hand crafted by Peter Ledermann – Made in the USA. Rebuild Price? $950 ~ less than 10% of MSRP !! – Imagine getting a NEW Hyperion ES-MR for $950 each time you wear it out, or break it by accident……certainly one of the fears of owning a high end cartridge. Not anymore! You will NOT lose your investment with a Soundsmith Hyperion as you do with all other brands……SpecificationsOutputLowOutput Voltage0.4 mVAdditional SpecificationsType:• Fixed Coil / Moving IronMount:• Standard ½”Stylus:• Micro-Ridge, 0.08 mm squareRadius of Curvature:• Selected Optimized Contour Contact LineCantilever:• Hand formed/treated selected Cactus “Spine”Recommended Tracking Force:• 1.8 – 2.2 gEffective Tip Mass:• 0.30 mgCompliance:• 10 μm/mNFrequence Response:• 20 – 20,000 Hz ± 1.0 dBChannel Separation @ 1000 Hz:• > 36 dB• N/A (Mono version)Channel Separation @ 50 – 15,000 Hz:• > 25 dB• N/A (Mono version)Channel Difference:• < 0.5 dB• < 1.0 dB (Mono version)Output Voltage @ 5cm/sec:• > 0.40 mVDC Resistance (DCR):• 10ΩCoil Inductance per channel:• 2.75 mHSuggested Preamp Gain:• 58 – 64 dBCartridge Weight:• 12.2 g (ES series)Recommended Load Resistance:• ≥ 470ΩRecommended Load Capacitance:• n/aNew ES Series DEMS design :What is DEMS??“Sometimes you can judge a book by its cover.” – Peter Ledermann.2018’s RMAF show was the official launch of Soundsmith’s new ES series of cartridges, where the attendees experienced the latest exploration into overlooked areas of cartridge design and solutions from Soundsmith.The ES line features not only a dramatic new look, but is a significant evolution of the DEMS system design (Dynamic Energy Management System). The new Soundsmith ES cartridge designs are a significant advancement in cartridge performance due to their ability to direct internal vibrational forces without reflection and disperse them properly to the tone arm. The absence of reflections enables the stylus to stay in far greater statistical contact with the groove walls — a critically important technical refinement. Increased liquidity and reduced “grain,” without loss of detail are some of the immediately discernible advantages of Soundsmith’s new ES models.The new line also features Azimuth adjustment built-in to each cartridge, as well as the option for electrical isolation for hum-prone systems.Every cartridge in Soundsmith’s lineup will now feature our sleek new ES body design. The upgrade is far more than cosmetic; the new shape is a departure from the reflective and “boxy” design of many cartridges whose internal construction contribute to uncontrolled vibrational issues adversely affecting performance. Peter says, “Think of how singing in an open field compares with singing in a shower.” Soundsmith has always challenged conventions, looking deeper into nuances of cartridge design that dramatically affect immediate and long term performance. These have included extreme reductions of moving mass and the use of novel materials and designs. The new ES lineup is a continuation of that research and development.ES series mountingThe new ES has some special mounting features that you need to be aware of.Sometimes when mounting on a grounded metal arm, a cartridge will create hum due to a ground loop. If you experience some low level hum due to ground loop, you can now solve this issue by using the two half-round white rods which are to be placed and used in the OUTER slots, seen on the top of the cartridge. Place them flat side UP.The rods are made of Alumina, and are insulating, thus allowing ground isolation for your cartridge without compromising the crucial mechanical energy transfer into the tone arm. This energy transfer is maintained due to the use of Alumina, which has the same properties as aluminum, but is non-conductive. Due to the novel body design of the ES cartridge, electrical isolation can still be maintained even though you may use metal screws.On tone arms that do not allow azimuth adjustment, it is now possible to achieve this adjustment by way of the ES series by using the one full round alumina rod in the center slot only, alternately tightening and loosening the mounting screws by small amounts.Hi-Fi Heaven 1549 Sixth StGreen Bay, WI 54304Contact us with your exact shipping address for accurate shipping cost.Larger speakers and items over 150lbs are strapped to a pallet and shipped via Freight including liftgate and residential delivery.We accept Pay-Pal or credit cards by contacting our store.We offer a 4% discount with payment by Zelle or check.Defective items are exchanged within 14 days from delivery.After 14 days, the manufacturer's warranty will apply. Contact us for any assistance in obtaining warranty assistance.Defective item returns must be in the manufacturer's original packaging, in like-new condition, including all packaging materials, shipped as-received and fully insured.Items are guaranteed to be as described.If a refund is desired, we will refund your full purchase price minus a 20% restocking fee.The item must be as received & unopened. Buyer pays return shipping costs.If you are having a problem, Please call before making a return claim on eBay.We do not offer free auditions or trials of merchandise.Returns will only be accepted for items that are truly defective.We use methods to detect product tampering.We will seek legal action against any individual or entity attempting to defraud us.Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304

Price: 9999.95 USD

Location: Green Bay, Wisconsin

End Time: 2025-02-11T17:12:25.000Z

Shipping Cost: 0 USD